No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display wmi-server

display wmi-server

Function

The display wmi-server command displays configuration and reference information about a WMI profile.

Format

display wmi-server { all | name wmi-server-name }

Parameters

Parameter

Description

Value

all

Displays information about all WMI profiles.

-

name wmi-server-name

Displays information about a specified WMI profile.

The WMI profile must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view configuration and reference information about a WMI profile.

Example

# Display information about all WMI profiles.

<HUAWEI> display wmi-server all
----------------------------------------------------
Profile name                        Reference
----------------------------------------------------
abc                                 0
----------------------------------------------------
Total: 1
Table 11-277  Description of the display wmi-server all command output

Item

Description

Profile name

Name of a WMI profile.

Reference

Number of times a WMI profile is referenced.

# Display information of the WMI profile abc.

<HUAWEI> display wmi-server name abc
------------------------------------------------------------------------------
Server ip                              : 10.10.10.10
Server port                            : 10032
Report interval(s)                     : 60
Max packet-size(Kbyte)                 : 5
Alive interval(min)                    : 3
Retry interval(min)                    : 5
Retry number                           : 0
Device enable                          : enable
Device data interval(s)                : 10
Ssid enable                            : enable
Ssid data interval(s)                  : 60
Radio enable                           : enable
Radio data interval(s)                 : 10
Interface enable                       : enable
Interface data interval(s)             : 60
Terminal enable                        : enable
Terminal data interval(s)              : 10
Neighbor device enable                 : enable 
Neighbor device data interval(s)       : 60
CP-CAR enable                          : enable
CP-CAR data interval(s)                : 300
EMDI enable                            : enable
EMDI data interval(s)                  : 10
Application statistics enable          : enable
Application statistics data interval(s): 300
------------------------------------------------------------------------------
Table 11-278  Description of the display wmi-server name command output

Item

Description

Server ip IP address of the WMI server.
Server port Port number of the WMI server.
Report interval(s) Data report interval.
Max packet-size(Kbyte) Maximum size of reported data.
Alive interval(min) Interval at which the AP attempts to connect to the WMI server.
Retry interval(min) Interval at which the AP attempts to reconnect to the WMI server.
Retry number Number of attempts the AP reconnects to the WMI server.
Device enable Whether device monitoring data collection is enabled.
Device data interval(s) Interval at which device monitoring data is collected.
Ssid enable Whether SSID monitoring data collection is enabled.
Ssid data interval(s) Interval at which SSID monitoring data is collected.
Radio enable Whether radio monitoring data collection is enabled.
Radio data interval(s) Interval at which radio monitoring data is collected.
Interface enable Whether interface monitoring data collection is enabled.
Interface data interval(s) Interval at which interface monitoring data is collected.
Terminal enable Whether STA data collection is enabled.
Terminal data interval(s) Interval at which STA data is collected.
Neighbor device enable Whether surrounding radio data collection is enabled.
Neighbor device data interval(s) Interval at which surrounding radio data is collected.
CP-CAR enable Whether CPCAR data collection is enabled.
CP-CAR data interval(s) Interval at which CPCAR data is collected.
EMDI enable Whether eMDI data collection is enabled.
EMDI data interval(s) Interval at which eMDI data is collected.
Application statistics enable Whether site guest data collection is enabled.
Application statistics data interval(s) Interval at which site guest data is collected.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124772

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next