No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
memory-usage threshold

memory-usage threshold


The memory-usage threshold command configures a memory usage alarm threshold for APs.

The undo memory-usage threshold command restores the default memory usage alarm threshold.

By default, the memory usage alarm threshold on an AP is 80.


memory-usage threshold threshold

undo memory-usage threshold






Specifies the memory usage alarm threshold of an AP.

The value is an integer that ranges from 30 to 100.


AP system profile view

Default Level

2: Configuration level

Usage Guidelines

You can run the memory-usage threshold command to configure the memory usage alarm threshold in the AP system profile view. The configuration is delivered to all APs using the profile.
  • When the memory usage of an AP exceeds the alarm threshold, the AP sends an alarm message to the AC, and the AC displays the alarm information.
  • When the memory usage of an AP falls below the alarm threshold, the AP sends a clear alarm message to the AC, and the AC displays the clear alarm information.


# Set the memory usage alarm threshold of AP 0 to 60.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name ap-system1
[HUAWEI-wlan-ap-system-prof-ap-system1] memory-usage threshold 60
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115293

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next