No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The hessid command configures a Homogenous Extended Service Set Identifier (HESSID) for a Hotspot2.0 network.

The undo hessid command deletes an HESSID.

By default, no HESSID is configured.


hessid mac-address

undo hessid






Specifies an HESSID.

The value is in H-H-H format. An H is a hexadecimal number of 4 digits.


Hotspot2.0 profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When multiple Hotspot2.0 networks are available, user terminals need to identify service providers of the connected networks. An SSID is not as unique as an HESSID, which can uniquely identify APs of the same service provider. Among the APs, the BSSID of one AP is used as the HESSID. The HESSID is an optional parameter in a Hotspot2.0 profile. Beacon and Probe Response frames sent from Hotspot2.0-capable APs carry network parameter information, which helps user terminals to determine whether network parameters need to be renewed.


If the HESSID is configured repeatedly, only the latest HESSID takes effect.


# Set the HESSID to e468-a350-89e0 in Hotspot2.0 profile hotspot.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] hotspot2-profile name hotspot
[HUAWEI-wlan-hotspot2-prof-hotspot] hessid e468-a350-89e0
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116911

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next