No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap sta-signal strength

display ap sta-signal strength

Function

The display ap sta-signal strength command displays the average signal strength of STAs connected to an AP.

Format

display ap sta-signal strength { ap-name ap-name | ap-id ap-id } [ radio radio-id ]

Parameters

Parameter

Description

Value

ap-name ap-name

Displays the average signal strength of STAs connected to the AP with a specified name.

The AP name must exist.

ap-id ap-id

Displays the average signal strength of STAs connected to the AP with a specified ID.

The AP ID must exist.

radio radio-id

Displays the average signal strength of STAs connected to a specified AP radio.

The radio ID must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view the average signal strength of STAs connected to an AP.

Example

# Display the average signal strength of STAs connected to AP huawei.

<HUAWEI> display ap sta-signal strength ap-name huawei
Station signal strength(): 0
Table 11-30  Description of the display ap sta-signal strength command output
Item Description

Station signal strength()

Average signal strength of STAs.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116437

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next