No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
address-mode (AP provisioning view)

address-mode (AP provisioning view)

Function

The address-mode command sets the mode in which an AP obtains an IP address.

The undo address-mode command restores the default mode in which an AP obtains an IP address.

By default, the mode in which an AP obtains an IP address is not configured.

Format

address-mode { dhcp | static }

undo address-mode

Parameters

Parameter Description Value
dhcp Indicates that an IP address is obtained in DHCP mode. The AP functions as a DHCP client and is assigned an IP address by the DHCP server. -
static Indicates that a static IP address is obtained. The AP must be configured with a static IP address. -

Views

AP provisioning view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run the address-mode command to configure an AP to obtain an IP address in DHCP, static mode.

Follow-up Procedure

Run the commit command to deliver configuration to APs and restart the APs to make the configuration take effect.

Example

# Configure an AP to obtain an IP address in DHCP mode.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] provision-ap
[HUAWEI-wlan-provision-ap] address-mode dhcp
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116880

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next