No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dynamic-edca threshold

dynamic-edca threshold


The dynamic-edca threshold command configures the threshold for the dynamic EDCA Best-Effort service.

The undo dynamic-edca threshold command restores the default threshold for the dynamic EDCA Best-Effort service.

The default threshold for the dynamic EDCA Best-Effort service is 6 pps.


dynamic-edca threshold be-service be-service-threshold

undo dynamic-edca threshold be-service





be-service be-service-threshold

Specifies the threshold for the dynamic EDCA Best-Effort service.

The value is an integer that ranges from 1 to 1000, in pps.


RRM profile view

Default Level

2: Configuration level

Usage Guidelines

When dynamic EDCA is enabled, the system dynamically adjusts EDCA parameters for the Best-Effort service based on the number of active users, improving user experience.

If the number of Best-Effort service packets from a user in the radio's internal statistics queue exceeds the specified threshold (specified using the dynamic-edca threshold command), the user is considered an active user.

Before running this command, you must run the dynamic-edca enable command to enable dynamic EDCA.


# Set the threshold for the dynamic EDCA Best-Effort service to 10 pps.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] rrm-profile name default
[HUAWEI-wlan-rrm-prof-default] dynamic-edca enable
[HUAWEI-wlan-rrm-prof-default] dynamic-edca threshold be-service 10
Related Topics
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114467

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next