No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
temporary-management enable (VAP profile view)

temporary-management enable (VAP profile view)

Function

The temporary-management enable command configures a VAP as the offline management VAP or antenna alignment VAP.

The undo temporary-management enable command restores a VAP to the default setting.

By default, a VAP is a service VAP.

Format

temporary-management enable

undo temporary-management enable

Parameters

None

Views

VAP profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

  • After the offline management VAP function is enabled using the undo temporary-management disable command in the AP system profile view, an AP automatically generates a management VAP when it becomes faulty. The default SSID and password of the management VAP are hw_manage_xxxx and hw_manage respectively. xxxx indicates the last four bits of the AP's MAC address. The maintenance personnel can associate the maintenance device to the default VAP and log in to the AP using Telnet to troubleshoot the fault. However, using the default management VAP brings security risks. Any wireless user may use the default SSID and password to log in to the offline AP and perform unauthorized operations.

  • After the antenna alignment VAP function is enabled using the undo temporary-management disable command in the AP system profile view, an AP automatically generates an antenna alignment VAP when it works properly. The default SSID and password of the management VAP are hw_manage_xxxx and hw_manage respectively. xxxx indicates the last four bits of the AP's MAC address. Using the default antenna alignment VAP also brings security risks.

To improve security of the offline management VAP and antenna alignment VAP, bind a security profile of a high security level to a VAP profile, set new SSIDs and passwords, configure the VAPs generated by the VAP profile as the offline management VAP and antenna alignment VAP, and bind the VAP profile to an AP group or AP to replace the default offline management VAP and antenna alignment VAP.

Follow-up Procedure

Run the undo temporary-management disable command to enable the offline management VAP and antenna alignment VAP functions in the AP system profile view to make the offline management VAP and antenna alignment VAP in the VAP profile take effect.

Precautions

  • If the VAPs are configured as the offline management VAP and antenna alignment VAP in a VAP profile, the security profile referenced by the VAP profile supports only the WEP or WPA/WPA2 PSK security policy.

  • If the VAPs are configured as the offline management VAP and antenna alignment VAP in a VAP profile, VAPs generated by the VAP profile cannot be used as service VAPs for service transmission.

  • The offline management VAP and antenna alignment VAP cannot be modified. To modify the VAPs, delete them first, and then modify the VAP attributes in the VAP profile view.

  • The offline management VAP function does not take effect on 4.9 GHz radios.

  • The offline management VAP function and service holding upon CAPWAP link disconnection are mutually exclusive. When the two functions are configured at the same time, the offline management VAP function cannot take effect.

  • In offline management VAP scenarios, STA address learning does not take effect.

Example

# Configure VAPs generated by VAP profile vap1 as the offline management VAP and antenna alignment VAP.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] vap-profile name vap1
[HUAWEI-wlan-vap-prof-vap1] temporary-management enable  
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116901

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next