No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
capwap message-integrity check disable

capwap message-integrity check disable


The capwap message-integrity check disable command disables integrity check of CAPWAP packets.

The undo capwap message-integrity check disable command enables integrity check of CAPWAP packets.

By default, integrity check of CAPWAP packets is enabled.


capwap message-integrity check disable

undo capwap message-integrity check disable




System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

CAPWAP packets are transmitted between the AC and APs. To prevent the packets from being forged or tampered with and prevent malformed packet attacks, you can configure integrity check of of CAPWAP packets.

Configuration Impact

After this configuration is modified, all online APs on the AC go offline.


# Enable integrity check of CAPWAP packets.

<HUAWEI> system-view
[HUAWEI] capwap message-integrity check disable
Warning: In a backup scenario, the PSK and status of CAPWAP message integrity check must be the same between the master and backup e
nds. This operation may cause devices using CAPWAP connections to reset or go offline. Continue? [Y/N]:y
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113894

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next