No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sta-offline-delay max-number

sta-offline-delay max-number

Function

The sta-offline-delay max-number command sets the maximum number of STAs that are allowed to delay going offline.

The undo sta-offline-delay max-number command restores the default maximum number of STAs that are allowed to delay going offline.

The default maximum number of STAs that are allowed to delay going offline is one fifth of the maximum number of STAs supported by an AC.

Format

sta-offline-delay max-number max-number

undo sta-offline-delay max-number

Parameters

Parameter

Description

Value

max-number

Specifies the maximum number of STAs that are allowed to delay going offline.

The value is an integer that ranges from 1 to the maximum number of STAs supported by an AC. The default value is one fifth of the maximum value. If one fifth of the maximum value is a non-integer value, round down the value.

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the STA offline delay function is enabled, you can run this command to set the maximum number of STAs that are allowed to delay going offline.

Set the maximum number of STAs that are allowed to delay going offline based on the network requirements and device performance. A large value causes the STA offline delay function to occupy many resources, affecting new STA access. A small value cannot achieve a noticeable effect in releasing the load on the authentication server.

Prerequisites

The STA offline delay function has been enabled using the sta-offline-delay enable command.

Example

# Set the maximum number of STAs that are allowed to delay going offline to 800.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] sta-offline-delay enable
[HUAWEI-wlan-view] sta-offline-delay max-number 800
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116887

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next