No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sta-offline-delay full-sta-reject enable

sta-offline-delay full-sta-reject enable

Function

The sta-offline-delay full-sta-reject enable command disables an AP to force STAs in offline delay state to go offline and allow new STAs to go online after the number of STAs reaches the maximum.

The undo sta-offline-delay full-sta-reject enable command enables an AP to force STAs in offline delay state to go offline and allow new STAs to go online after the number of STAs reaches the maximum.

By default, an AP is enabled to force STAs in offline delay state to go offline and allow new STAs to go online after the number of STAs reaches the maximum.

Format

sta-offline-delay full-sta-reject enable

undo sta-offline-delay full-sta-reject enable

Parameters

None

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the STA offline delay function is enabled on an AP, you can run this command to enable an AP to force STAs in offline delay state to go offline and allow new STAs to go online after the number of STAs reaches the maximum.

Prerequisites

Before this command is executed, the sta-offline-delay enable command has been executed to enable the STA offline delay function.

Example

# Disable an AP to force STAs in offline delay state to go offline and allow new STAs to go online after the number of STAs reaches the maximum.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] sta-offline-delay enable
[HUAWEI-wlan-view] sta-offline-delay full-sta-reject enable
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126939

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next