No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lldp admin-status

lldp admin-status

Function

The lldp admin-status command sets the LLDP operation mode for an AP.

The undo lldp admin-status command restores the default LLDP operation mode for an AP.

By default, the LLDP operation mode of an AP is TxRx.

Format

lldp admin-status { rx | tx | txrx }

undo lldp admin-status

Parameters

Parameter

Description

Value

rx

Specifies the LLDP operation mode as Rx. An AP only receives but does not send LLDP packets.

-

tx

Specifies the LLDP operation mode as Tx. An AP only sends but does not receive LLDP packets.

-

txrx

Specifies the LLDP operation mode as TxRx. An AP sends and receives LLDP packets.

-

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

You can configure the LLDP operation mode for an AP based on the site requirements. For example, if you set the LLDP operation mode of an AP to Tx, the AP sends LLDP packets but cannot receive LLDP packets from neighbors. In this situation, the AP cannot discover neighbors.

Example

# Set the LLDP operation mode of an AP to Tx.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name ap-system1
[HUAWEI-wlan-ap-system-prof-ap-system1] lldp admin-status tx
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114340

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next