No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
network-authen-type

network-authen-type

Function

The network-authen-type command sets a network authentication type for a Hotspot2.0 profile.

The undo network-authen-type command deletes a network authentication type.

By default, no network authentication type is configured.

Format

network-authen-type { acceptance [ redirect-url url ] | dns-redirection | http-https-redirection redirect-url url | online-enroll }

undo network-authen-type

Parameters

Parameter

Description

Value

acceptance

Indicates acceptance of terms and conditions.

-

redirect-url url

Specifies the redirected URL address.

-

dns-redirection

Indicates DNS redirection.

-

http-https-redirection

Indicates HTTP and HTTPS redirection.

-

online-enroll

Indicates online enrollment.

-

Views

Hotspot2.0 profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Beacon and Probe Response frames sent from Hotspot2.0-capable APs carry network parameter information, which helps user terminals to discover and select proper networks. If the network operator requests user terminals to execute specified actions, for example, opening a web page for Portal authentication, the Additional Steps Required for Access (ASRA) field must be set to 1, indicating that user terminals must implement extra authentication when connecting to a network. You can run the network-authen-type command to specify a network authentication type.

Example

# Set the network authentication type to online enrollment in Hotspot2.0 profile hotspot.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] hotspot2-profile name hotspot
[HUAWEI-wlan-hotspot2-prof-hotspot] network-authen-type online-enroll
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127912

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next