No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sta-load-balance dynamic rssi-threshold

sta-load-balance dynamic rssi-threshold

Function

The sta-load-balance dynamic rssi-threshold command sets an RSSI threshold for member devices in a dynamic load balancing group.

The undo sta-load-balance dynamic rssi-threshold command restores the default RSSI threshold of member devices in a dynamic load balancing group.

By default, the RSSI threshold of member devices in a dynamic load balancing group is –65 dBm.

Format

sta-load-balance dynamic rssi-threshold rssi-threshold

undo sta-load-balance dynamic rssi-threshold

Parameters

Parameter

Description

Value

rssi-threshold

Specifies the RSSI threshold of member devices in a dynamic load balancing group.

The value is an integer that ranges from –75 to –55, in dBm.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the RSSI threshold of member devices in a dynamic load balancing group is set an AP compares the RSSI of a STA with the configured RSSI threshold after receiving the Probe Request packet sent by the STA. If the STA's RSSI exceeds the configured RSSI threshold, the AP reports the STA information to the AC, and the AP is added to the dynamic load balancing group. Otherwise, the AP directly filters the STA information and does not report the information to the AC, and the AP will be not be added to the dynamic load balancing group.

Setting an RSSI threshold for member devices in a dynamic load balancing group is to filter APs with weak signals, so that STAs can be load balanced between APs with better signals. This prevents STAs from associating with APs with weak signals but light loads. This function does not affect STAs' going online.

Precautions

This command takes effect only in sta-number mode.

Example

# Set the RSSI threshold for member devices in a dynamic load balancing group to –70 dBm in RRM profile default.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] rrm-profile name default
[HUAWEI-wlan-rrm-prof-default] sta-load-balance dynamic rssi-threshold -70
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127669

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next