No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset wlan dynamic-blacklist

reset wlan dynamic-blacklist

Function

The reset wlan dynamic-blacklist command deletes information about devices in the dynamic blacklist.

Format

reset wlan dynamic-blacklist { ap-id ap-id | ap-name ap-name | mac-address mac-address | all }

Parameters

Parameter

Description

Value

ap-id ap-id

Deletes the dynamic blacklist information reported by the AP with a specified ID.

The AP ID must exist.

ap-name ap-name

Deletes the dynamic blacklist information reported by the AP with a specified name.

The AP name must exist.

mac-address mac-address

Deletes the device with a specified MAC address from the dynamic blacklist.

The MAC address must exist.

all

Deletes all information in the dynamic blacklist.

-

Views

All views

Default Level

3: Management level

Usage Guidelines

Usage Scenario

The reset wlan dynamic-blacklist command is applicable to the following scenarios:
  • To recollect the dynamic blacklist information, run the reset wlan dynamic-blacklist all command to delete all information in the dynamic blacklist. After that, the AC recollects the information.
  • To remove an authorized device from the dynamic blacklist, run the reset wlan dynamic-blacklist mac-address command to remove the MAC address of the device from the dynamic blacklist. After that, information sent from the device is not rejected.

Precautions

Running the reset wlan dynamic-blacklist command affects packet receiving of APs. Exercise caution when running this command.

Example

# Delete the device with MAC address 78AC-C0C1-C1FC from the dynamic blacklist.

<HUAWEI> reset wlan dynamic-blacklist mac-address 78ac-c0c1-c1fc
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113115

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next