No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
peer-ap mac (WDS whitelist profile view)

peer-ap mac (WDS whitelist profile view)

Function

The peer-ap mac command adds MAC addresses of neighboring APs that are allowed to connect to an AP to a WDS whitelist profile.

The undo peer-ap mac command deletes the MAC addresses of neighboring APs from a WDS whitelist profile.

By default, no MAC address of a neighboring AP is added to a WDS whitelist profile.

Format

peer-ap mac mac-address

undo peer-ap mac mac-address

Parameters

Parameter

Description

Value

mac-address

Specifies the MAC address of a neighboring AP to be added to a WDS whitelist profile.

The value is in H-H-H format. An H is a hexadecimal number of 4 digits.

Views

WDS whitelist profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After a WDS whitelist profile is created, you can run the peer-ap mac command to add neighboring APs' MAC addresses to the profile.

If a WDS whitelist profile is bound to a WDS profile, only APs with MAC addresses in the WDS whitelist profile can access the local AP, and other APs are denied access.

Precautions

A maximum of six MAC addresses can be added to a WDS whitelist profile.

Example

# Create the WDS whitelist profile whitelist and add the MAC address 0001-0001-0001 to the whitelist profile. Bind the WDS whitelist profile whitelist to radio 0 of APs in the AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] wds-whitelist-profile name whitelist
[HUAWEI-wlan-wds-whitelist-whitelist] peer-ap mac 0001-0001-0001
[HUAWEI-wlan-wds-whitelist-whitelist] quit
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] radio 0
[HUAWEI-wlan-group-radio-group1/0] wds-whitelist-profile whitelist
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116456

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next