No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
spectrum-report

spectrum-report

Function

The spectrum-report command enables the function of reporting spectrum data on an AP radio.

The undo spectrum-report command disables the function of reporting spectrum data on an AP radio.

By default, the function of reporting spectrum data is disabled on an AP radio.

Format

spectrum-report { ap-name ap-name | ap-id ap-id } radio radio-id

undo spectrum-report { { ap-name ap-name | ap-id ap-id } [ radio radio-id ] | all }

Parameters

Parameter

Description

Value

ap-name ap-name

Specifies an AP name. The AP name and radio ID identify a radio.

The AP name must already exist.
ap-id ap-id

Specifies an AP ID. The AP ID and radio ID identify a radio.

The AP ID must already exist.

radio radio-id

Specifies a radio ID.

The value is an integer that ranges from 0 to 2.

Three radios are available only on the AP4030TN, AP4051TN, and AP8050TN-HD.

all

Specifies all APs.

-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the function of reporting spectrum data is enabled on an AP radio, the AP encapsulates collected data into UDP packets and sends the packets to the spectrum server. After receiving the data, the spectrum server analyzes the data and then displays radio information of non-Wi-Fi devices to users through images or tables.

Prerequisites

The spectrum analysis function has been enabled on a radio using the spectrum-analysis enable command.

Follow-up Procedure

Run the spectrum-analysis server command in the spectrum profile view to specify the IP address and port number of the spectrum server.

Precautions

The spectrum-report command becomes invalid after a restart and needs to be configured again.

Example

# Enable the function of reporting spectrum data on radio 0 of AP ap-huawei.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] spectrum-report ap-name ap-huawei radio 0
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115621

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next