No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
broadcasting-content (AP group view and AP view)

broadcasting-content (AP group view and AP view)

Function

The broadcasting-content uuid command sets a universally unique identifier (UUID) of the Bluetooth Low Energy (BLE) broadcast frames sent by an AP's built-in Bluetooth module.

The undo broadcasting-content uuid command restores the UUID of the BLE broadcast frames sent by an AP's built-in Bluetooth module to the default value.

By default, the UUID of the BLE broadcast frames sent by an AP's built-in Bluetooth module is null.

NOTE:
  • Only the AP2050DN-E, AP2051DN, AP2051DN-E, AP2051DN-S, AP4050DE-M, AP4050DE-M-S, AP4050DE-B-S, AP7060DN, AP4051TN, AP6052DN, AP7050DE, AP7052DE, AP7052DN, AP7152DN, AP8050DN, AP8050DN-S, AP8050TN-HD, AP8082DN, AP8150DN, AP8182DN, R250D-E, and R251D-E support the Bluetooth broadcast function.

Format

broadcasting-content uuid { uuid-character-string uuid-value | uuid-hex uuid-value }

undo broadcasting-content uuid

Parameters

Parameter Description Value
uuid uuid-character-string uuid-value Specifies the UUID field of BLE broadcast frames, which is a string of characters and used to identity devices. The value is a string of 1 to 16 characters.
uuid uuid-hex uuid-value Specifies the UUID field of BLE broadcast frames, which is in hexadecimal decimal notation and used to identity devices. The value is a string of 1 to 32 hexadecimal digits.

Views

AP group view and AP view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After enabling the broadcast function of an AP's built-in Bluetooth module using the broadcaster enable command, you can run the broadcasting-content uuid command to set a UUID of the BLE broadcast frames. If you do not want to set a UUID of BLE broadcast frames in a BLE profile, set it in the AP group view or AP view.

Precautions

The UUIDs set in the AP view, BLE profile bound to the AP view, AP group view, and BLE profile bound to the AP group take effect in the following order:
  1. UUID set in the AP view
  2. UUID set in the BLE profile bound to the AP view
  3. UUID set in the AP group view
  4. UUID set in the BLE profile bound to the AP group view

Example

# Set the UUID of the BLE broadcast frames sent by an AP's Bluetooth module in the AP view to 12345678123456789 in hexadecimal notation.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-id 0
[HUAWEI-wlan-ap-0] broadcasting-content uuid uuid-hex 12345678123456789
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124874

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next