No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap-reset work-group

ap-reset work-group


The ap-reset work-group command restarts APs in a WLAN work group.


ap-reset work-group { groupId | all | default }


Parameter Description Value
groupId Restarts APs in a specified WLAN work group. The value is an integer ranging from 1 to 4.
all Restarts APs in all WLAN work groups. -
default Restarts APs in the default WLAN work group. -


WLAN view

Default Level

3: Management level

Usage Guidelines

The ap-reset work-group command restarts APs in a WLAN work group. New APs can still go online during the restart.

To clear APs in a WLAN work group, run the state block command to set the WLAN work group in block state and then run the ap-reset work-group command.


# Restart APs in WLAN work group 1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-reset work-group 1
Warning: Reset AP(s). Continue? [Y/N]:y
Related Topics
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124822

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next