No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset wlan ids attack-history

reset wlan ids attack-history

Function

The reset wlan ids attack-history command deletes historical records about the attacking devices detected.

Format

reset wlan ids attack-history { all | flood | spoof | wapi-psk | weak-iv | wep-share-key | wpa-psk | wpa2-psk | mac-address mac-address }

Parameters

Parameter

Description

Value

all

Deletes historical records about all types of attacking devices.

-

flood

Deletes historical records about devices launching flood attacks.

-

spoof

Deletes historical records about devices launching spoofing attacks.

-

wapi-psk

Deletes historical records about devices that perform brute force cracking in WAPI-PSK authentication mode.

-

weak-iv

Deletes historical records about devices launching weak IV attacks.

-

wep-share-key

Deletes historical records about devices that perform brute force cracking in WEP-SK authentication mode.

-

wpa-psk

Deletes historical records about devices that perform brute force cracking in WPA-PSK authentication mode.

-

wpa2-psk

Deletes historical records about devices that perform brute force cracking in WPA2-PSK authentication mode.

-

mac-address mac-address

Deletes historical records about detected devices launching attacks with specified MAC addresses.

The value is in H-H-H format. An H is a hexadecimal number of 4 digits.

Views

All views

Default Level

3: Management level

Usage Guidelines

After attack detection is enabled, historical records about attacking devices detected are recorded. When there is excessive information recorded or the recorded information is useless, you can run the reset wlan ids attack-history command to delete the information.

Example

# Delete historical records about all the current attacking devices.

<HUAWEI> reset wlan ids attack-history all
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126946

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next