No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wids device detect enable

wids device detect enable

Function

(AP group radio view) The wids device detect enable command enables device detection on all specified radios in an AP group.

(AP group radio view) The undo wids device detect enable command disables device detection on all specified radios in an AP group.

(AP radio view) The wids device detect enable command enables device detection on an AP radio.

(AP radio view) The undo wids device detect enable command cancels the configuration of the device detection function on an AP radio. The status of this function on the AP radio is then determined by the status of this function in the AP group radio view.

By default, device detection is disabled on AP radios.

Format

wids device detect enable

undo wids device detect enable

Parameters

None

Views

AP group radio view, AP radio view

Default Level

2: Configuration level

Usage Guidelines

Application Scenario

After the wireless device detection function is enabled, the monitoring AP detects information about wireless devices in its coverage range and reports the information to the AC. The AC determines whether unauthorized devices exist on the WLAN.

Precautions

The configuration in the AP radio view has a higher priority than that in the AP group radio view.

After command keep-service enable is executed, if the wids device detect enable and wids contain enable commands are configured to enable rogue or interference device detection and containment, the AP will continue providing data services after going offline. However, the AC considers the AP as a rogue or interference device and adds it to the containment list. The containment mechanism will disconnect STAs from the AP. Therefore, service holding upon CAPWAP link disconnection does not take effect in this case.

After command keep-service enable allow new-access is executed, if the wids device detect enable and wids contain enable commands are configured to enable rogue or interference device detection and containment, the AP will continue providing data services after going offline. However, the AC considers the AP as a rogue or interference device and adds it to the containment list. The containment mechanism will disable the AP from allowing access of new STAs. Therefore, the function of enabling an offline AP to allow access of new STAs does not take effect in this case.

Example

# Enable device detection on radio 0 in AP group office.
<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-group name office
[HUAWEI-wlan-ap-group-office] radio 0
[HUAWEI-wlan-group-radio-office/0] wids device detect enable
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126657

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next