No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
broadcaster enable

broadcaster enable

Function

The broadcaster enable command enables the Bluetooth broadcast function of an AP's built-in Bluetooth module.

The undo broadcaster enable command disables the Bluetooth broadcast function of an AP's built-in Bluetooth module.

By default, the Bluetooth broadcast function of an AP's built-in Bluetooth module is disabled.

NOTE:
  • Only the AP2050DN-E, AP2051DN, AP2051DN-E, AP2051DN-S, AP4050DE-M, AP4050DE-M-S, AP4050DE-B-S, AP7060DN, AP4051TN, AP6052DN, AP7050DE, AP7052DE, AP7052DN, AP7152DN, AP8050DN, AP8050DN-S, AP8050TN-HD, AP8082DN, AP8150DN, AP8182DN, R250D-E, and R251D-E support the Bluetooth broadcast function.

Format

broadcaster enable

undo broadcaster enable

Parameters

None

Views

BLE profile view

Default Level

2: Configuration level

Usage Guidelines

When an AP's built-in Bluetooth module is used as a BLE device, you can run this command to enable the Bluetooth broadcast function. After this function is enabled, the built-in Bluetooth module sends BLE broadcast frames to surrounding devices. The frame content complies with the iBeacon protocol.

Enabling both the Bluetooth scanning and broadcast functions of an AP affects the efficiency for the AP's Bluetooth module to scan surrounding BLE devices. When an AP does not serve as a Bluetooth base station, it is recommended that the broadcast function of the AP be disabled.

Example

# Enable the Bluetooth broadcast function.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ble-profile name huawei
[HUAWEI-wlan-ble-prof-huawei] broadcaster enable
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127281

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next