No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The mesh-profile command creates a Mesh profile or displays the Mesh profile view.

The undo mesh-profile command deletes a Mesh profile.

By default, the system provides the Mesh profile default.


mesh-profile name profile-name

undo mesh-profile { all | name profile-name }





name profile-name

Specifies the name of a Mesh profile.

The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").


Deletes all Mesh profiles.

The Mesh profile default cannot be deleted.



WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After a Mesh profile is applied to an AP radio, Mesh VAPs are created on the radio.

Each Mesh profile must have a Mesh ID. The default Mesh ID of a Mesh profile is HUAWEI-WLAN-MESH. You can run the mesh-id command to set a Mesh ID for a Mesh profile.


# Create the Mesh profile test and set the Mesh ID of the profile to mesh-net.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mesh-profile name test
[HUAWEI-wlan-mesh-prof-test] mesh-id mesh-net
Warning: This action may cause service interruption. Continue?[Y/N]y
Related Topics
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124381

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next