No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
telnet enable

telnet enable


The telnet enable command enables Telnet on an AP.

The undo telnet enable command disables Telnet on an AP.

By default, Telnet is disabled on an AP.


telnet enable

undo telnet enable




AP system profile view

Default Level

2: Configuration level

Usage Guidelines

You do not need to log in to a Telnet-enabled AP from a user terminal to maintain it locally. Instead, you can log in to the Telnet-enabled AP through Telnet to remotely configure and maintain it.

To improve login security, you are advised to run the undo stelnet server disable command to enable the STelnet server function and log in to the AP through STelnet.


# Enable Telnet on an AP.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name ap-system1
[HUAWEI-wlan-ap-system-prof-ap-system1] telnet enable
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115771

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next