No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
report-interval (WMI profile view)

report-interval (WMI profile view)

Function

The report-interval command sets the interval for APs to report KPI information to a WMI server.

The undo report-interval command restores the default interval for APs to report KPI information to a WMI server.

By default, APs report KPI information to a WMI server at an interval of 60 seconds.

Format

report-interval interval

undo report-interval

Parameters

Parameter Description Value
interval Specifies the interval for APs to report KPI information to a WMI server.

The value is an integer that ranges from 10 to 300, in seconds.

Views

WMI profile view

Default Level

2: Configuration level

Usage Guidelines

You can configure the interval for APs to report KPI information to a WMI server based on the device usage, network resource usage, and the server's requirements for information collection precision. A shorter interval indicates a higher data report frequency, occupying more device and network resources. A longer interval indicates less information to be collected by the server, with lower collection precision.

Example

# Set the interval for APs to report KPI information to a WMI server to 30 seconds.
<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] wmi-server name abc
[HUAWEI-wlan-wmi-server-prof-abc] report-interval 30
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124439

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next