No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap-group

display ap-group

Function

The display ap-group command displays configuration and reference information about an AP group.

Format

display ap-group { all | name group-name }

Parameters

Parameter

Description

Value

all

Displays information about all AP groups.

-

name group-name

Displays information about a specified AP group.

The AP group must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display ap-group command to view configuration and reference information about an AP group.

Example

# Display information about all AP groups.

<HUAWEI> display ap-group all
----------------------------------------------------------
Name                           APs
----------------------------------------------------------
default                        1
ap-group1                      0
----------------------------------------------------------
Total: 2
Table 11-46  Description of the display ap-group all command output

Item

Description

Name

Name of an AP group.

APs

Number of APs in an AP group.

# Display information about the AP group default.

<HUAWEI> display ap-group name default
---------------------------------------------------------------------------------------
AP system profile          : default
Regulatory domain profile  : default
WIDS profile               : default
BLE profile                :  
AP location                : 
UUID                       :  
Domain name                : 
AP wired port profile
 Interface FE0             : default
 Interface FE1             : default
 Interface FE2             : default
 Interface FE3             : default
 Interface GE0             : default
 Interface GE1             : default
 Interface GE2             : default
 Interface GE3             : default
 Interface GE4             : default
 Interface GE5             : default
 Interface GE6             : default
 Interface GE7             : default
 Interface GE8             : default
 Interface GE9             : default
 Interface GE10            : default
 Interface GE11            : default
 Interface GE12            : default
 Interface GE13            : default
 Interface GE14            : default
 Interface GE15            : default
 Interface GE16            : default
 Interface GE17            : default
 Interface GE18            : default
 Interface GE19            : default
 Interface GE20            : default
 Interface GE21            : default
 Interface GE22            : default
 Interface GE23            : default
 Interface GE24            : default
 Interface GE25            : default
 Interface GE26            : default
 Interface GE27            : default
 Interface MultiGE0        : default
 Interface XGE0            : default
 Interface XGE1            : default
 Interface XGE2            : default
 Interface XGE3            : default
 Interface Eth-trunk0      : default
Radio 0              
 Radio 2.4G profile        : default
 Radio 5G profile          : default
 VAP profile               : 
 Mesh profile              :  
 WDS profile               :  
 Mesh whitelist profile    :  
 WDS whitelist profile     :  
 Location profile          :  
 Radio switch              : enable
 Channel                   : -
 Channel bandwidth         : 20mhz
 EIRP(dBm)                 : 127
 Antenna gain(dB)          : -
 Coverage distance(100 m)  : 3
 Work mode                 : normal
 Flexible radio switch     : on
 Radio frequency           : 2.4G
 Spectrum analysis         : disable
 WIDS device detect        : disable
 WIDS attack detect        : -
 WIDS contain switch       : disable
 Auto channel select                   : enable
 Auto transmit power select            : enable
 Beacon switch             : enable
 CTS switch                : enable
 CTS delay time(us)        : none
Radio 1              
 Radio 5G profile          : default
 VAP profile               : 
 Mesh profile              :  
 WDS profile               :  
 Mesh whitelist profile    :  
 WDS whitelist profile     :  
 Location profile          :  
 Radio switch              : enable
 Channel                   : -
 Channel bandwidth         : 20mhz
 EIRP(dBm)                 : 127
 Antenna gain(dB)          : -
 Coverage distance(100 m)  : 3
 Work mode                 : normal
 Flexible radio switch     : on
 Radio frequency           : 5G
 Spectrum analysis         : disable
 WIDS device detect        : disable
 WIDS attack detect        : -
 WIDS contain switch       : disable
 Auto channel select                   : enable
 Auto transmit power select            : enable
 Beacon switch             : enable
 CTS switch                : enable
 CTS delay time(us)        : none
Radio 2              
 Radio 2.4G profile        : default
 Radio 5G profile          : default
 VAP profile               : 
 Mesh profile              :  
 WDS profile               :  
 Mesh whitelist profile    :  
 WDS whitelist profile     :  
 Location profile          :  
 Radio switch              : enable
 Channel                   : -
 Channel bandwidth         : 20mhz
 EIRP(dBm)                 : 127
 Antenna gain(dB)          : -
 Coverage distance(100 m)  : 3
 Work mode                 : normal
 Flexible radio switch     : on
 Radio frequency           : 5G
 Spectrum analysis         : disable
 WIDS device detect        : disable
 WIDS attack detect        : -
 WIDS contain switch       : disable
 Auto channel select                   : enable
 Auto transmit power select            : enable
Card 1              
 Card connect type         : -
 Wired port profile        : default
 Iot profile               :  
 Protocol Type             : - 
 First Port                : - 
 Extended Port             : - 
Card 2              
 Card connect type         : -
 Wired port profile        : default
 Iot profile               :  
 Protocol Type             : -
 First Port                : - 
 Extended Port             : - 
Card 3              
 Card connect type         : -
 Wired port profile        : default
 Iot profile               :  
 Protocol Type             : - 
 First Port                : - 
 Extended Port             : - 
Card usb              
 Iot profile               :  
 Protocol Type             : - 
 First Port                : - 
 Extended Port             : - 
Table 11-47  Description of the display ap-group name command output

Item

Description

AP system profile AP system profile referenced by an AP group.

To configure the parameter, run the ap-system-profile (AP group view and AP view) command.

Regulatory domain profile Regulatory domain profile referenced by an AP group.

To configure the parameter, run the regulatory-domain-profile command.

WIDS profile WIDS profile referenced by an AP group.

To configure the parameter, run the wids-profile (AP group view and AP view) command.

BLE profile BLE profile referenced by an AP group.

To configure the parameter, run the ble-profile (AP group view and AP view) command.

UUID UUID of a BLE broadcast frame sent by the AP's built-in Bluetooth module.

To configure the parameter, run the broadcasting-content (AP group view and AP view) command.

AP location

Installation position of an AP in the AP group.

To configure the parameter, run the location command.

Domain name

Default domain name suffix of the AP.

To configure the parameter, run the ip domain-name command.

AP wired port profile AP wired port profile referenced by an AP group.

To configure the parameter, run the wired-port-profile (AP group view and view) command.

Interface Interface-name Interface name.
Radio 0/Radio 1/Radio 2 Radio ID.
Radio 2.4G profile 2G radio profile referenced by an AP group.

To configure the parameter, run the radio-2g-profile command.

Radio 5G profile 5G radio profile referenced by an AP group.

To configure the parameter, run the radio-5g-profile command.

VAP profile VAP profile referenced by an AP group.The displayed format is "VAP ID:VAP profile name (service VLAN defined when binding to the VAP profile, single VLAN, or VLAN pool)."

To configure the parameter, run the vap-profile command.

Mesh profile Mesh profile referenced by an AP group.

To configure the parameter, run the mesh-profile radio command.

WDS profile WDS profile referenced by an AP group.

To configure the parameter, run the wds-profile radio command.

Mesh whitelist profile Mesh whitelist profile referenced by an AP group.

To configure the parameter, run the mesh-whitelist-profile (AP group radio view or AP radio view) command.

WDS whitelist profile WDS whitelist profile referenced by an AP group.

To configure the parameter, run the wds-whitelist-profile (AP group radio view or AP radio view) command.

Location profile Location profile referenced by an AP group.

To configure the parameter, run the location-profile command.

Radio switch Whether a radio is enabled.

To configure the parameter, run the radio disable command.

Channel Working channel of a radio.

To configure the parameter, run the channel command.

Channel bandwidth Operating bandwidth of a radio.

To configure the parameter, run the channel command.

EIRP(dBm) Transmit power of a radio, in dBm.

To configure the parameter, run the eirp command.

Antenna gain(dB) Antenna gain of a radio, in dBm.

To configure the parameter, run the antenna-gain command.

Coverage distance(100 m) Radio coverage distance parameter ( unit: 100 m).

To configure the parameter, run the coverage distance command.

Work mode Working mode of a radio.

To configure the parameter, run the work-mode command.

Flexible radio switch

Whether the DFA function of a radio is enabled.

To configure the parameter, run the calibrate flexible-radio disable command.

Radio frequency Working frequency of a radio.

To configure the parameter, run the frequency command.

Spectrum analysis Whether spectrum analysis is enabled.

To configure the parameter, run the spectrum-analysis enable command.

WIDS device detect Whether wireless device detection is enabled.

To configure the parameter, run the wids device detect enable command.

WIDS attack detect Whether attack detection is enabled.

To configure the parameter, run the wids attack detect enable command.

WIDS contain switch Whether rogue device containment is enabled.

To configure the parameter, run the wids contain enable command.

Auto channel select

Whether to enable automatic channel selection.

To configure this parameter, run the calibrate auto-channel-select disable command.

Auto transmit power select

Whether to enable automatic transmit power selection.

To configure this parameter, run the calibrate auto-txpower-select disable command.

Beacon switch

Whether RUs are enabled to send Beacon frames.

To configure this parameter, run the beacon disable command.

CTS switch

Whether RUs are enabled to respond to STAs with CTS packets.

To configure this parameter, run the cts disable command.

CTS delay time(us)

Delay time after which RUs respond to STAs with CTS packets.

To configure this parameter, run the cts delay command.

Card 1/Card 2/Card 3/Card usb IoT card.
Card connect type Communication connection type between IoT cards and APs.

To configure the parameter, run the card connect-type command.

Wired port profile Bound AP wired port profile.

To configure the parameter, run the wired-port-profile (IoT card interface view) command.

Iot profile Bound IoT profile.

To configure the parameter, run the iot-profile (IoT card interface view) command.

Protocol Type Communication protocol between the AP and host computer.
First Port Source port for the first channel.
Extended Port Source port for the extended channel.
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116930

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next