No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dca-channel channel-set

dca-channel channel-set


The dca-channel channel-set command configures a calibration channel set.

The undo dca-channel channel-set command restores the default calibration channel set.

By default, a calibration channel set contains channels 1, 6, and 11 on the 2.4G radio and contains all channels supported by the corresponding country code on the 5G radio. If the country code is China, the calibration channel set does not contain channels 36 to 64. When configuring the calibration channels, users can specify channels as prompted.


dca-channel { 2.4g | 5g } channel-set channel-value

undo dca-channel { 2.4g | 5g } channel-set


Parameter Description Value
2.4g | 5g
Specifies the frequency band on which radio calibration is performed.
  • 2.4g: Radios work on the 2.4 GHz frequency band.
  • 5g: Radios work on the 5 GHz frequency band.


channel-set channel-value

Specifies a calibration channel set.

The value is a character string. You can select calibration channels as prompted. If you select multiple channels, use commas (,) to separate channel names.


Regulatory domain profile view

Default Level

2: Configuration level

Usage Guidelines

The 5 GHz frequency band has richer spectrum resources. In addition to 20 MHz channels, APs working on the 5 GHz frequency band support 40 MHz and 80 MHz channels. Larger-bandwidth channels mean higher transmission rates. However, at least three channels are required in radio calibration to achieve the optimal calibration effect. When configuring the calibration bandwidth, ensure that enough calibration channels are available for use.

You can run this command to specify a calibration channel set for an AP. The AP selects channels from the channel set to calibrate. This reduces the burden on the AP.


To ensure a good calibration effect, you are advised to configure at least three calibration channels.

To prevent signal interference, ensure that adjacent APs work in non-overlapping channels. The 2.4 GHz frequency band has overlapping channels. When configuring calibration channels, you are advised to configure a non-overlapping calibration channel set containing channels 1, 6, and 11 or containing channels 1, 5, 9, and 13.

To specify a 40 MHz calibration channel, you need to specify two consecutive 20 MHz channels. To specify an 80 MHz calibration channel, you need to specify four consecutive 20 MHz channels. The combinations of 20 MHz channels making up the 40 MHz and 80 MHz channels are fixed.

You can also use the dca-channel bandwidth command to configure the calibration bandwidth and the dca-channel channel-set command to configure calibration channels as prompted.

If no calibration channel set is configured, the device probes channels based on the calibration channels corresponding to the country code.


When configuring a calibration channel set, avoid using radar channels.

The channels you configure must be supported by the terminals; otherwise, the terminals cannot discover wireless signals. For example, when the country code is set to China, 5 GHz channels 36, 40, 44, 48, 52, 56, 60, and 64 can be configured. However, most terminals do not support these channels currently. If these channels are configured, the terminals cannot discover wireless signals. In this case, you can configure 5 GHz channels 149, 153, 157, 161, and 165, which are supported by the terminals.

Channels 184, 188, 192, and 196 on the 4.9 GHz frequency band can be used for radio scanning but cannot be used for channel calibration.

For three 5G radios, configure at least five calibration channels. For two 5G radios, configure at least three calibration channels.


# Configure a calibration channel set composed of 40 MHz channels 149, 153, 157, and 161 on the 5 GHz frequency band.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] regulatory-domain-profile name huawei
[HUAWEI-wlan-regulate-domain-huawei] dca-channel 5g bandwidth 40mhz
[HUAWEI-wlan-regulate-domain-huawei] dca-channel 5g channel-set 149,153,157,161
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126583

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next