No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
type (IoT profile view)

type (IoT profile view)

Function

The type command sets the type for an IoT card.

The undo type command restores the default IoT card type.

The default type of an IoT card is common.

Format

type { cas-edu | common }

undo type

Parameters

Parameter

Description

Value

cas-edu

Specifies an IoT card that complies with IoT standards of the China Academy of Science.

-

common

Specifies an IoT card that complies with Huawei's IoT standards.

-

Views

IoT profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When Huawei ACs are used in the education system solution of the China Academy of Science, set the IoT card type to cas-edu. In other scenarios, set the IoT card type to common.

Precautions

After the IoT card type is modified in an IoT profile, other parameters in this IoT profile will restore to the default values.

If the iot-profile (IoT card interface view) command has been executed to bind an IoT profile, the IoT card type cannot be modified. The IoT card type can be modified only after the IoT profile is unbound.

After the type cas-edu command is executed to set the card type to cas-edu, the config-agent permit ip-address and share-key commands cannot be executed.

Example

# Set the type of an IoT card to cas-edu.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] iot-profile name wlan-iot
[HUAWEI-wlan-iot-prof-wlan-iot] type cas-edu
Warning: After the card type is modified, other configuration items in the profile are cleared.Continue?[Y/N]:y
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126782

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next