No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display wlan location config-info aeroscout

display wlan location config-info aeroscout

Function

The display wlan location config-info aeroscout command displays configurations delivered to APs from the AeroScout location server.

Format

display wlan location config-info aeroscout { ap-id ap-id | ap-name ap-name }

Parameters

Parameter Description Value
ap-id ap-id

Displays LBS configuration of the AP with a specified AP ID.

The AP ID must exist.

ap-name ap-name

Displays LBS configuration of the AP with a specified AP name.

The AP name must already exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

You can run the display wlan location config-info aeroscout command to check configurations delivered to APs from the AeroScout location server.

Prerequisites

AeroScout location has been enabled using the aeroscout tag-enable or aeroscout mu-enable command, and the AeroScout location server has delivered the configuration information to the AP.

Example

# Display AeroScout location configuration on the AP ap_4.

<HUAWEI> display wlan location config-info aeroscout ap-name ap_4
----------------------------------------------------------------
AP ID                            : 4
AP name                          : ap_4
AP MAC address                   : 1051-7254-5a80
Response IP address              : 10.3.3.3
Response port                    : 1144
AP tag mode                      : start
AP MU mode                       : start
Dilution factor                  : 100
Dilution timeout(s)              : 5
Tags multicast address           : 010c-cc00-0000
Compounded message timeout(0.1s) : 12
Table 11-165  Description of the display wlan location config-info aeroscout command output

Item

Description

AP ID

AP ID.

AP name

Name of the AP.

AP MAC address

MAC address of the AP.

Response IP address

IP address of the location server that receives the Response packets from the AP.

Response port

Listening port of the location server from which the location server receives the Response packets from the AP.

AP tag mode

Tag detection status on the AP:
  • start: The AP starts tag detection.
  • stop: The AP stops tag detection.

AP MU mode

MU detection status on the AP:
  • start: The AP starts tag detection.
  • stop: The AP stops tag detection.

Dilution factor

Count-based packet dilution. For example, the value 100 indicates that one out of 100 packets is reported.

Dilution timeout(s)

Time-based packet dilution. For example, the value 1 indicates that one packet is reported every second.

Tags multicast address

Multicast MAC address of the tag.

Compounded message timeout(0.1s)

Maximum time during which the AP caches tag, in 100 milliseconds.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126671

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next