No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
eth-trunk (AP wired port profile view)

eth-trunk (AP wired port profile view)

Function

The eth-trunk command adds an AP interface to an Eth-Trunk.

The undo eth-trunk command removes an AP interface from an Eth-Trunk.

By default, an AP interface is not added to any Eth-Trunk.

Format

eth-trunk trunk-id

undo eth-trunk

Parameters

Parameter

Description

Value

trunk-id

Specifies the ID of an Eth-Trunk.

The value is an integer, and the value is 0.

Views

AP wired port profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To improve the connection reliability and increase the bandwidth, you can run this command to bind multiple interfaces into an Eth-Trunk.

Prerequisite

The physical interface to be added to an Eth-Trunk cannot have other configurations. Before adding a physical interface to an Eth-Trunk, clear all configurations on it except the interface status, descriptions, LLDP function, and alarm function for CRC errors.

Precautions

  • After the configuration, you need to restart the AP to make the configured Eth-Trunk on the AP's wired interfaces take effect.

  • APs that have only one physical uplink network interface do not support this command.

  • Downlink interfaces on an AP do not support the Eth-Trunk function.

  • Member interfaces in an Eth-Trunk do not support the PVID or user isolation configuration.

NOTE:

This command takes effect only on the AP7030DE, AP9330DN, AP4030DN-E, AP5030DN, AP5130DN, AP8030DN, AP8050DN, AP8150DN, AP8050DN-S, AP8130DN, AD9431DN-24X, AP4051TN, AP6052DN, AP8050TN-HD, AP8082DN, AP8182DN, AP7052DN, AP7060DN, WA375DD-CE, AP7152DN, AD9430DN-24, AD9430DN-12, AP4030TN, AP4050DN-E, AP4050DN-HD, AP6050DN, AP6150DN and AP7050DN-E.

Example

# Add the AP interface to Eth-Trunk 0.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] wired-port-profile name wired-port1
[HUAWEI-wlan-wired-port-wired-port1] eth-trunk 0
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124364

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next