No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sfn-roam roam-check rssi-accumulate

sfn-roam roam-check rssi-accumulate

Function

The sfn-roam roam-check rssi-accumulate command sets the cumulative RSSI change threshold for agile distributed SFN roaming STAs.

The undo sfn-roam roam-check rssi-accumulate command restores the default cumulative RSSI change threshold for agile distributed SFN roaming STAs.

By default, the cumulative RSSI change threshold of agile distributed SFN roaming STAs is 8 dB.

Format

sfn-roam roam-check rssi-accumulate threshold rssi-accumulate-value

undo sfn-roam roam-check rssi-accumulate

Parameters

Parameter

Description

Value

threshold rssi-accumulate-value

Specifies the cumulative RSSI change threshold for agile distributed SFN roaming STAs.

The value is an integer that ranges from 1 to 32, in dB.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

The cumulative RSSI change threshold of agile distributed SFN roaming STAs helps you adjust the roaming sensitivity. A roaming switchover occurs when the cumulative RSSI change value reaches the specified threshold. A large value causes the slow roaming switchover, affecting user experience. A small value causes frequent roaming switchovers, affecting system performance.

Example

# Set the cumulative RSSI change threshold for agile distributed SFN roaming STAs to 10 dB.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] rrm-profile name wlan-rrm
[HUAWEI-wlan-rrm-prof-wlan-rrm] sfn-roam roam-check rssi-accumulate threshold 10
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127689

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next