No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap version

display ap version

Function

The display ap version command displays AP version information.

Format

display ap version { all | { ap-group ap-group-name | version-name version-name } * }

Parameters

Parameter

Description

Value

all

Displays version information about all APs.

-

ap-group ap-group-name

Displays version information about all APs of a specified AP group.

The AP group must exist.

version-name version-name

Displays version information about a specified AP.

The value is string of 11 to 17 characters, in the format of VxxxRxxxCxxx or VxxxRxxxCxxxSPCxxx.

For example, V200R006C00 or V200R005C10SPC200.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display ap version command to view AP version information.

Example

# Display version information about all APs.

<HUAWEI> display ap version all
Compatible version : V200R009 V200R008 V200R007 V200R006C10 V200R006C20
--------------------------------------------------------------------------------
ID    Name           Group   Type            Version            state
--------------------------------------------------------------------------------
0    60de-4476-e360 default AP6010DN-AGN     V200R009           normal
--------------------------------------------------------------------------------
Total: 1
Table 11-40  Description of the display ap version command output

Item

Description

Compatible version

Compatible version.

ID

Index

Name

AP name.

Group

AP group name.

Type

AP type.

Version

AP version name.

state

AP state. For details, see Table 11-5.

Table 11-41  AP state list

AP State

Description

Possible Cause

Handling Suggestion

commit-failed

WLAN service configurations fail to be delivered to an AP after the AP goes online on an AC.

After the AP goes online on the AC, WLAN service configurations are performed for the AP. If the link between the AP and AC is disconnected or the peer end has no response, the AP enters the commit-failed state.

Check the network connection.

committing

WLAN service configurations are being delivered to an AP after the AP goes online on an AC.

After the AP goes online on the AC, WLAN service configurations are being delivered to the AP.

This is a normal state, and no action is required.

config

WLAN service configurations are being delivered to an AP when the AP is going online on an AC.

After the AP establishes a link with the AC, WLAN service configurations are delivered to the AP. During this process, the AP is in config state.

This is a normal state, and no action is required.

config-failed

WLAN service configurations fail to be delivered to an AP when the AP is going online on an AC.

After the AP establishes a link with the AC, WLAN service configurations are delivered to the AP. If the configuration delivery fails due to various reasons (such as link disconnection), the AP enters the config-failed state.

Check the network connection.

download

An AP is in upgrade state.

When the AP is performing an upgrade, it enters the download state.

When the AP upgrade is complete, check the AP state.

fault

An AP fails to go online.

The AP fails to go online, which is usually caused by the following:
  • The AP fails to obtain an IP address or obtains an incorrect IP address.
  • The network between the AP and AC is faulty.
  • The AP fails to be authenticated.
  • The number of APs on an AC has reached the maximum value.
  • The AP is faulty.

Handle the AP online failure. For details, see AP Online Failure in the Troubleshooting Insights.

idle

It is the initialization state of an AP before it establishes a link with the AC for the first time.

The AP has not established a CAPWAP link with the AC, the MAC address and SN of the AP that is added offline are different from the actual ones, or license resources are insufficient.

Perform the following operations.

Check whether the AP is connected to the network. If the AP connection is normal, go to next step.

Check the MAC address and SN of the AP that is added offline are different from the actual MAC address and SN of the AP. If not, perform the following operations:
  1. Run the display ap all command to obtain AP information.
  2. Run the undo ap { ap-name ap-name | ap-id ap-id | ap-mac ap-mac | ap-group group-name | all } command to delete the AP.
  3. Run the

    ap-id ap-id [ [ type-id type-id | ap-type ap-type ] { ap-mac ap-mac | ap-sn ap-sn | ap-mac ap-mac ap-sn ap-sn } ]

    or ap-mac ap-mac [ type-id type-id | ap-type ap-type ] [ ap-id ap-id ] [ ap-sn ap-sn ] command to add correct AP information.

If the fault persists, expand the license capacity. Note that RUs managed by the AC do not occupy license resources of the AC.

name-conflicted

The name of an AP conflicts with that of an existing AP.

The name of an AP conflicts with the name of another AP that has been online on the same AC.

Run the ap-rename ap-id ap-id new-name ap-new-name command to change the AP name.

normal

An AP is working properly.

An AP successfully goes online on an AC.

This is a normal state, and no action is required.

standby

The AP is in normal state on the standby AC.

In the HSB, dual-link cold backup, or N+1 backup scenario, if the link between the active and standby ACs is established properly, the AP is in standby state on the standby AC and in normal state on the active AC.

This is a normal state, and no action is required.

ver-mismatch

The version of an AP does not match that of an AC on which the AP is to go online.

The versions of the AP and the AC mismatch.

Log in to Huawei technical support website and download the release notes. Based on the version mapping, upgrade the AP or AC to the matching version.

countryCode-mismatch

The country code of an AP does not match that of the AC on which the AP is about to go online.

The current version of the AP does not support the country code configured on the AC.

The AP does not support the country code. Upgrade the AP or change the country code configured on the AC.

type-mismatch

The AP type does not match that configured on the AC.

The AP type configured on the AC does not match the actual AP type.

Change the AP type configured on the AC.

unauth

The AP is not authenticated.

The AP fails to be authenticated.

Run the ap-confirm command to confirm unauthenticated APs and allow them to go online.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113119

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next