No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display provision-ap parameter-list

display provision-ap parameter-list

Function

The display provision-ap parameter-list command displays AP provisioning parameters in the AP provisioning view.

Format

display provision-ap parameter-list

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Before running the commit command to deliver the AP provisioning parameters configured in the AP provisioning view, you can run the display provision-ap parameter-list command to check whether the parameters are correct and complete.

If a parameter is displayed as - in the command output, the parameter of the APs is not changed after the configuration is committed.

Example

# Display AP provisioning parameters in the AP provisioning view.

<HUAWEI> display provision-ap parameter-list
--------------------------------------------------------------------------------
AP name              : -
AP group             : -
AP address mode      : -
IPv4 address         : -
IPv4 mask address    : -
IPv4 gateway address : -
IPv4 AC list         : -
--------------------------------------------------------------------------------
Table 11-61  Description of the display provision-ap parameter-list command output

Item

Description

AP name

AP name.

To set this parameter, run the ap-name (AP provisioning view) command.

AP group

Group that an AP joins.

To set this parameter, run the ap-group (AP provisioning view) command.

AP address mode

Mode in which an AP obtains an IP address.

To set this parameter, run the address-mode (AP provisioning view) command.

IPv4 address

Static IPv4 address of an AP.

To set this parameter, run the ip-address (AP provisioning view) command.

IPv4 mask address

Static IPv4 address mask of an AP.

To set this parameter, run the ip-address (AP provisioning view) command.

IPv4 gateway address

IPv4 address gateway of the AP.

To set this parameter, run the ip-address (AP provisioning view) command.

IPv4 AC list

AC IPv4 address list of an AP.

To set this parameter, run the ac-list(AP provisioning view) command.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127670

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next