No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display air-scan-profile

display air-scan-profile


The display air-scan-profile command displays information about air scan profiles.


display air-scan-profile { all | name profile-name }


Parameter Description Value

Displays information about all air scan profiles.


name profile-name

Displays information about a specified air scan profile.

The air scan profile name must already exist.


All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display air-scan-profile command to view information about air scan profiles.


# Display information about all air scan profiles.

<HUAWEI> display air-scan-profile all
Profile name        Reference
default             2
huawei              1
Total: 2
Table 11-112  Description of the display air-scan-profile all command output
Item Description

Profile name

Name of an air scan profile.


Number of times that the air scan profile is referenced.

# Display information about the air scan profile huawei.

<HUAWEI> display air-scan-profile name huawei
Scan switch       : enable
Scan period(ms)   : 80
Scan interval(ms) : 3000
Scan channel-set  : dca-channel
Table 11-113  Description of the display air-scan-profile name command output
Item Description

Scan switch

Whether air scanning is enabled.

To configure the parameter, run the scan-disable command.

Scan period(ms)

Air scan period.

To set the air scan period, run the scan-period command.

Scan interval(ms)

Air scan interval.

To set the air scan interval, run the scan-interval command.

Scan channel-set

Air scan channel set.

To set the air scan channel set, run the scan-channel-set command.

Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126533

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next