No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
p2p-cross-connect disable

p2p-cross-connect disable


The p2p-cross-connect disable command configures P2P management information to prevent cross connections of P2P devices.

The undo p2p-cross-connect disable command deletes P2P management information.

By default, P2P management information is not configured.


p2p-cross-connect disable

undo p2p-cross-connect disable




Hotspot2.0 profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Hotspot2.0 provides security measures for STAs. It prevents direct access between STAs to reduce the STA attack possibility. The P2P protocol allows direct communication between STAs; therefore, a Hotspot2.0-supported AP can add P2P management information into Beacon. In the management information, STAs are not allowed to set up P2P connections with each other.


The p2p-cross-connect disable command is not recommended. An AP does not support the P2P protocol or process P2P packets; therefore, it is unnecessary to remove P2P management information from packets.


# Configure P2P management information in the hotspot profile.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] hotspot2-profile name hotspot
[HUAWEI-wlan-hotspot2-prof-hotspot] p2p-cross-connect disable
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115745

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next