No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mesh-handover-profile

mesh-handover-profile

Function

The mesh-handover-profile command creates a Mesh handover profile or displays the Mesh handover profile view.

The undo mesh-handover-profile command deletes a Mesh handover profile.

By default, the system provides the Mesh handover profile default.

Format

mesh-handover-profile name profile-name

undo mesh-handover-profile { all | name profile-name }

Parameters

Parameter

Description

Value

name profile-name

Specifies the name of a Mesh handover profile.

The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").

all

Deletes all Mesh handover profiles.

NOTE:

The Mesh handover profile default cannot be deleted.

-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

After a Mesh handover profile is bound to a Mesh profile, the Mesh profile can provide the vehicle-ground fast link handover function and apply to vehicle-ground communication scenarios.

Example

# Create the Mesh handover profile handover and bind it to the Mesh profile test.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mesh-handover-profile name handover
[HUAWEI-wlan-mesh-handover-handover] quit
[HUAWEI-wlan-view] mesh-profile name test
[HUAWEI-wlan-mesh-prof-test] mesh-handover-profile handover
Warning: This action may cause service interruption. Continue?[Y/N]y
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124396

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next