No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
eapol-response dest-address transform-condition

eapol-response dest-address transform-condition

Function

The eapol-response dest-address transform-condition command specifies the EAPOL-response packets to be encapsulated by an AP.

The undo eapol-response dest-address transform-condition command restores the default settings.

By default, an AP encapsulates only the EAPOL-response packets with the destination MAC addresses being the AP's BSSID.

Format

eapol-response dest-address transform-condition { always | equal-bssid }

undo eapol-response dest-address transform-condition

Parameters

Parameter

Description

Value

always

Configures the AP to encapsulate all EAPOL-response packets.

-

equal-bssid

Configures the AP to encapsulate only the EAPOL-response packets with the destination MAC address being the AP's BSSID.

-

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

The destination MAC addresses of the EAPOL-response packets sent by some STAs are APs' BSSIDs, but the destination MAC addresses of the EAPOL-response packets sent by other STAs are not APs' BSSIDs. You need to run this command to specify the EAPOL-response packets to be encapsulated.

Example

# Configure the AP to encapsulate all EAPOL-response packets.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name ap-system1
[HUAWEI-wlan-ap-system-prof-ap-system1] eapol-response dest-address transform-condition always  
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127056

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next