No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mesh-handover-profile (Mesh profile view)

mesh-handover-profile (Mesh profile view)


The mesh-handover-profile command binds a Mesh handover profile to a Mesh profile.

The undo mesh-handover-profile command unbinds a Mesh handover profile from a Mesh profile.

By default, no Mesh handover profile is bound to a Mesh profile.


mesh-handover-profile profile-name

undo mesh-handover-profile






Specifies the name of the Mesh handover profile bound to a Mesh profile.

The Mesh handover profile must exist.


Mesh profile view

Default Level

2: Configuration level

Usage Guidelines

You can run the mesh-handover-profile command to bind a Mesh handover profile to a Mesh profile so that the Mesh profile can provide the vehicle-ground fast link handover function and apply to vehicle-ground communication scenarios.


# Create the Mesh handover profile handover and bind it to the Mesh profile test.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mesh-handover-profile name handover
[HUAWEI-wlan-mesh-handover-handover] quit
[HUAWEI-wlan-view] mesh-profile name test
[HUAWEI-wlan-mesh-prof-test] mesh-handover-profile handover
Warning: This action may cause service interruption. Continue?[Y/N]y
Related Topics
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 112911

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next