No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
nai-realm-profile (Hotspot2.0 profile view)

nai-realm-profile (Hotspot2.0 profile view)


The nai-realm-profile command binds a NAI realm profile to a Hotspot2.0 profile.

The undo nai-realm-profile command unbinds a NAI realm profile from a Hotspot2.0 profile.

By default, no NAI realm profile is bound to a Hotspot2.0 profile.


nai-realm-profile profile-name

undo nai-realm-profile






Specifies the name of a NAI realm profile.

The NAI realm profile must exist.


Hotspot2.0 profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure Hotspot2.0 services on a non-cellular network. When connecting to the non-cellular network, user terminals can obtain service provider information of the network, including the NAI realm name and authentication mode. This facilitates terminal access. You can run the nai-realm-profile command to create a NAI realm profile and the nai-realm command in the NAI realm profile view to configure NAI realms, and then bind the NAI realm profile to a Hotspot2.0 profile to make the configuration take effect.


# Bind NAI realm profile nai-realm-profile1 to Hotspot2.0 profile hotspot.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] hotspot2-profile name hotspot
[HUAWEI-wlan-hotspot2-prof-hotspot] nai-realm-profile nai-realm-profile1
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 125717

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next