No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display snmp-agent trap feature-name wlan all

display snmp-agent trap feature-name wlan all

Function

The display snmp-agent trap feature-name wlan all command displays the status of all traps on the WLAN module.

Format

display snmp-agent trap feature-name wlan all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After the trap function of a specified feature is enabled, you can run the display snmp-agent trap feature-name wlan all command to check the status of all traps of WLAN. You can use the snmp-agent trap enable feature-name wlan command to enable the trap function of WLAN.

Prerequisites

SNMP has been enabled. See snmp-agent.

Example

# Display all the traps of the WLAN module.

<HUAWEI>display snmp-agent trap feature-name wlan all
------------------------------------------------------------------------------
Feature name: WLAN
Trap number : 121
------------------------------------------------------------------------------
Trap name                       Default switch status   Current switch status
hwApFaultNotify                 on                      on
hwApNormalNotify                on                      on
hwApTypeNotMatchNotify          on                      on
hwApPingResultNotify            on                      on
hwApUpdateBeginNotify           on                      on
......
hwApVersionMismatchNotify       on                      on
Table 11-79  Description of the display snmp-agent trap feature-name wlan all command output

Item

Specification

Feature name

Name of the module that the trap belongs to.

Trap number

Number of traps.

Trap name

Name of traps.

Default switch status

Default status of the trap function:
  • on: indicates that the trap function is enabled by default.

  • off: indicates that the trap function is disabled by default.

Current switch status

Status of the trap function:

  • on: indicates that the trap function is enabled.

  • off: indicates that the trap function is disabled.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 117271

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next