No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display wlan non-wifi-device history

display wlan non-wifi-device history

Function

The display wlan non-wifi-device history command displays information about non-Wi-Fi devices in the historical list.

Format

display wlan non-wifi-device history { all | { ap-name ap-name | ap-id ap-id } radio radio-id }

Parameters

Parameter

Description

Value

all

Display information about all the non-Wi-Fi devices in the historical list.

-

ap-name ap-name

Display information about the non-Wi-Fi devices detected by a specified AP name in the historical list.

The AP name must exist.

ap-id ap-id

Display information about the non-Wi-Fi devices detected by a specified AP ID in the historical list.

The AP ID must exist.

radio radio-id

Display information about the non-Wi-Fi devices detected by a specified AP radio in the historical list.

The value is an integer that ranges from 0 to 2.

Three radios are available only on the AP4030TN, AP4051TN, and AP8050TN-HD.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After the aging time of non-Wi-Fi devices is set on the AC using the spectrum-analysis non-wifi-device aging-time command, the AC adds a non-Wi-Fi device to the historical list if an AP does not send information about the non-Wi-Fi device to the AC again.

Example

# Display information about the non-Wi-Fi devices detected by all APs in the historical list.

<HUAWEI> display wlan non-wifi-device history all
----------------------------------------------------------------
S/No.                                  : 0
Detect AP name                         : huawei
Detect AP radio ID                     : 1
Detect AP channel                      : 44
Non-Wi-Fi device type                  : 9
Non-Wi-Fi device name                  : Unknown fix freq device
Non-Wi-Fi device frequency type        : Narrow bandwidth
Non-Wi-Fi device channel               : 147,148
Non-Wi-Fi device RSSI                  : -59,-66
Non-Wi-Fi device detect time last      : 2014-11-19/17:05:05
Non-Wi-Fi device center frequency(MHz) : 5739
Non-Wi-Fi device bandwidth(KHz)        : 2708
Non-Wi-Fi device duty(%)               : 79
Non-Wi-Fi device interfere level       : 3
----------------------------------------------------------------
Total: 1
Table 11-133  Description of the display wlan non-wifi-device history command output

Item

Description

S/No.

No.of historical records.

Detect AP name

Name of the AP that has detected a non-Wi-Fi device.

Detect AP radio ID

ID of the AP radio on which a non-Wi-Fi device is detected.

Detect AP channel

Type of the detected non-Wi-Fi device.

Non-Wi-Fi device type

ID of the AP channel on which a non-Wi-Fi device is detected.

Non-Wi-Fi device name

Name of the non-Wi-Fi device.

Non-Wi-Fi device frequency type

Frequency type of the non-Wi-Fi device.

Non-Wi-Fi device RSSI

RSSI of the non-Wi-Fi device.

Non-Wi-Fi device channel

Channel of the non-Wi-Fi device.

Non-Wi-Fi device detect time last

Detection time for the non-Wi-Fi device.

Non-Wi-Fi device center frequency(MHz)

Center frequency of the non-Wi-Fi device.

Non-Wi-Fi device bandwidth(KHz)

Bandwidth of the non-Wi-Fi device.

Non-Wi-Fi device duty(%)

Duty cycle of the non-Wi-Fi device.

Non-Wi-Fi device interfere level

Interference level of the non-Wi-Fi device. The value ranges from 0 to 3. A larger value indicates stronger interference.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 123427

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next