No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ble monitoring-list

ble monitoring-list

Function

The ble monitoring-list command adds specified Bluetooth devices to the Bluetooth device monitoring list.

The undo ble monitoring-list command deletes specified Bluetooth devices from the Bluetooth device monitoring list.

By default, no Bluetooth devices are added to the monitoring list.

Format

ble monitoring-list mac mac-address1 [ to mac-address2 ]

undo ble monitoring-list [ mac mac-address1 [ to mac-address2 ] ]

Parameters

Parameter Description Value
mac mac-address1 Specifies the MAC address of a Bluetooth device to be monitored.

The value is in H-H-H format. An H is a hexadecimal number of 4 digits.

to mac-address2 Specifies the end MAC address of a Bluetooth device when Bluetooth devices are added to or deleted from the monitoring list in batches. The mac-address2 value must be equal to or larger than the mac-address1 value. mac-address1 and mac-address2 jointly specify a range of MAC addresses.

The value is in H-H-H format. An H is a hexadecimal number of 4 digits.

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the Bluetooth monitoring, Bluetooth tag location, or Bluetooth data transparent transmission function is enabled using the sniffer enable command, all Bluetooth devices are monitored when no Bluetooth device (BLE device, Bluetooth tag, or Bluetooth client) is added to the monitoring list. When any Bluetooth device is offline or has insufficient battery power, an alarm is triggered on the AC accordingly. When Bluetooth devices are added to the monitoring list, only the Bluetooth devices in the list are monitored. When a Bluetooth device in the monitoring list is offline or has insufficient battery power, an alarm is triggered on the AC accordingly. Bluetooth clients do not support low power alarms.

Precautions

After the BLE monitoring, Bluetooth tag location, or Bluetooth data transparent transmission function is disabled using the undo sniffer enable command, an alarm is triggered on the AC indicating that Bluetooth devices are offline.

Bluetooth devices with all-0 or all-F MAC addresses cannot be added to the monitoring list.

Example

# Add the Bluetooth device with MAC address 1234-1234-1000 to the monitoring list.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ble monitoring-list mac 1234-1234-1000

# Add Bluetooth devices with MAC addresses 1234-1234-1000 to 1234-1234-1006 to the monitoring list.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ble monitoring-list mac 1234-1234-1000 to 1234-1234-1006
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115546

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next