No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sta-number start-threshold

sta-number start-threshold

Function

The sta-number start-threshold command sets the start threshold for load balancing based on the number of users in a static load balancing group.

The undo sta-number start-threshold command deletes the configured start threshold for load balancing based on the number of users in a static load balancing group.

By default, the start threshold for load balancing based on the number of users in a static load balancing group is 10.

Format

sta-number start-threshold start-threshold-value

undo sta-number start-threshold

Parameters

Parameter

Description

Value

start-threshold start-threshold-value

Specifies the start threshold for load balancing based on the number of users in a static load balancing group.

The value is an integer that ranges from 1 to 40.

Views

Static load balancing group view

Default Level

2: Configuration level

Usage Guidelines

You can use this command to set the start threshold for load balancing based on the number of users in a static load balancing group. If the load on a radio does not reach the start threshold, the device does not implement load balancing control on access STAs.

Example

# Set the start threshold for load balancing based on the number of users in the static load balancing group to 5.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] sta-load-balance static-group name coco
[HUAWEI-wlan-sta-lb-static-coco] sta-number start-threshold 5
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116062

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next