No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poe power-threshold (AP system profile view)

poe power-threshold (AP system profile view)

Function

The poe power-threshold command sets the alarm threshold of the PoE power consumption percentage.

The undo poe power-threshold command restores the default alarm threshold of the PoE power consumption percentage.

By default, the alarm threshold is 100%.

Format

poe power-threshold threshold-value

undo poe power-threshold

Parameters

Parameter

Description

Value

threshold-value

Specifies the alarm threshold of the PoE power consumption percentage. When the power consumption reaches this value, a PoE power alarm is generated.

The value is an integer that ranges from 0 to 100, in percentage.

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The poe power-threshold command sets the alarm threshold of the PoE power consumption percentage. If the total PoE power is 380 W and the alarm threshold is 90%, an alarm is generated when the power consumption is greater than 342 W. When the power consumption falls below 342 W, the alarm is cleared.

Precautions

This command takes effect only on the AP2051DN-E, R251D-E, AP8082DN, AP8182DN, AP4050DN-E, AP4050DN-HD, AP7050DN-E, AP2050DN-E, R250D-E, AD9431DN-24X, AD9430DN-24, and AD9430DN-12.

Example

# Set the alarm threshold of the PoE power consumption percentage to 80%.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name apsys1
[HUAWEI-wlan-ap-system-prof-apsys1] poe power-threshold 80
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127353

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next