No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
inter-ac roam disable

inter-ac roam disable

Function

The inter-ac roam disable command disables inter-AC roaming.

The undo inter-ac roam disable command enables inter-AC roaming.

By default, inter-AC roaming is enabled.

Format

inter-ac roam disable

undo inter-ac roam disable

Parameters

None

Views

SSID profile view

Default Level

2: Configuration level

Usage Guidelines

If STAs roam from one AC to another, they have to be re-authenticated to access the network. To limit the STA roaming scope within an AC, you can run the inter-ac roam disable command to disable inter-AC roaming.

Example

# Disable inter-AC roaming.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ssid-profile name default
[HUAWEI-wlan-ssid-prof-default] inter-ac roam disable
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115277

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next