No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
led off

led off


The led off command configures AP indicators to turn off or turn off during the specified time range.

The undo led off command restores the default settings.

By default, AP indicators are allowed to turn on.


led off

undo led off




AP system profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Blinking indicators of indoor APs deployed in hospitals and hotels may affect people's nighttime rest. To prevent this, run the led off command to configured AP indicators to turn off or turn off during the specified time range.

If you need to locate AP faults by observing AP indicator status, run the undo led off command to allow the AP indicators to turn on.


The configuration performed using the led blink-time command takes precedence over that performed using the led off command. That is, if AP indicators are configured to blink and to turn off or turn off during the specified time range, the configuration performed using the led off command takes effect after the RU indicators blink.


# Configure AP indicators to turn off.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name ap-system1
[HUAWEI-wlan-ap-system-prof-ap-system1] led off
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126086

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next