No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
calibrate tpc threshold

calibrate tpc threshold

Function

The calibrate tpc threshold command sets the Transmit Power Control (TPC) coverage threshold.

The undo calibrate tpc threshold command restores the default TPC coverage threshold.

The default TPC coverage threshold is –60 dBm.

Format

calibrate tpc threshold threshold

undo calibrate tpc threshold

Parameters

Parameter

Description

Value

threshold threshold

Specifies the TPC coverage threshold.

The value is an integer that ranges from -85 to -35, in dBm.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

When radio calibration is enabled, the TPC coverage threshold is different depending on AP deployment scenarios because the AP deployment distance or height differs. To ensure the optimal coverage effect, adjust the TPC coverage threshold based on the actual AP deployment situations. A large threshold indicates a wider transmit power range that can be adjusted through TPC.

Example

# Set the TPC coverage threshold to -70 dBm.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] rrm-profile name default
[HUAWEI-wlan-rrm-prof-default] calibrate tpc threshold -70
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 123141

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next