No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
channel

channel

Function

(AP group radio view) The channel command configures the working bandwidth and channel for all specified radios in an AP group.

(AP group radio view) The undo channel command restores the default working bandwidth and channel for all specified radios in an AP group.

(AP radio view) The channel command configures the working bandwidth and channel for an AP radio.

(AP radio view) The undo channel command cancels the configuration of the working bandwidth and channel on an AP radio. The working bandwidth and channel on the AP radio are then determined by those configured in the AP group radio view.

By default, the working bandwidth of a radio is 20 MHz, and no working channel is configured for a radio.

You can run the display ap config-info command to check the channel in use on a radio.

Format

channel { 20mhz | 40mhz-minus | 40mhz-plus | 80mhz | 160mhz } channel

channel 80+80mhz channel1 channel2

undo channel

Parameters

Parameter

Description

Value

20mhz

Sets the working bandwidth of a radio to 20 MHz.

-

40mhz-minus

Sets the working bandwidth of a radio to 40 MHz Minus.

-

40mhz-plus

Sets the working bandwidth of a radio to 40 MHz Plus.

-

80mhz

Sets the working bandwidth of a radio to 80 MHz.

-

160mhz

Sets the working bandwidth of a radio to 160 MHz.

-

80+80mhz

Sets the working bandwidth of a radio to 80+80 MHz.

-

channel/channel1/channel2

Specifies the working channel for a radio. The channel is selected based on the country code and radio mode.

The parameter is an enumeration value. The value range is determined according to the country code and radio mode.

Views

AP radio view, AP group radio view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Different radios use different channels. Channels for radios also vary in different countries and regions. Select channels based on the actual situations.

Precautions

The configured channel parameters must match the radio frequency band. For details about mappings between channel parameters and frequency bands, see Country Codes & Channels Compliance. You can obtain this table at Huawei technical support website.

The channels you configure must be supported by the terminals; otherwise, the terminals cannot discover wireless signals. For example, when the country code is set to China, 5 GHz channels 36, 40, 44, 48, 52, 56, 60, and 64 can be configured. However, most terminals do not support these channels currently. If these channels are configured, the terminals cannot discover wireless signals. In this case, you can configure 5 GHz channels 149, 153, 157, 161, and 165, which are supported by the terminals.

If an AP detects radar signals on a channel, the channel cannot be configured as the radio channel of the AP in 30 minutes. However, the channel can be configured as the radio channel of other APs not detecting radar signals on it.

The configuration in the AP radio view has a higher priority than that in the AP group radio view.

If an AP works in dual-5G mode, the channels of the two 5G radios must be separated by at least one channel.

For example, a country supports 40 MHz 5G channels 36, 44, 52, and 60. When deploying 5G radio channels, if one radio is deployed on channel 36, it is recommended that the other radio be deployed on channel 52 or 60. Channel 44 is not recommended in this case.

NOTE:
  • The 80 MHz, 160 MHz, and 80+80 MHz working bandwidths are only supported in the 5G radio view.

  • 802.11ac APs support the 80 MHz configuration, whereas four-spatial-stream 802.11ac APs allow for the 160 MHz or 80+80 MHz configuration.

Example

# Set the working bandwidth to 20 MHz and channel to 6 for radio 0 of AP 1.
<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-id 1
[HUAWEI-wlan-ap-1] radio 0
[HUAWEI-wlan-radio-1/0] channel 20mhz 6
Warning: This action may cause service interruption. Continue?[Y/N]y
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116977

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next