No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
priority-map tunnel-upstream trust

priority-map tunnel-upstream trust

Function

The priority-map tunnel-upstream trust command configures a trusted priority type used in mapping from 802.11 packets to tunnel packets when packets are sent to the AC from an AP.

The undo priority-map tunnel-upstream trust command restores the default trusted priority type used in mapping from 802.11 packets to tunnel packets when packets are sent to the AC from an AP.

By default, the 802.11e priority is used in mapping from 802.11 packets to tunnel packets when packets are sent to the AC from an AP.

Format

priority-map tunnel-upstream trust { dot11e | dscp }

undo priority-map tunnel-upstream trust

Parameters

Parameter

Description

Value

dot11e

Specifies the 802.11e priority as the trusted priority type used in mapping from 802.11 packets to tunnel packets.

-

dscp

Specifies the DSCP priority as the trusted priority type used in mapping from 802.11 packets to tunnel packets.

-

Views

Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To provide QoS guarantee for data packets of different users when packets are transmitted over a tunnel, configure a specific tunnel priority or priority mapping.

802.11 packets sent from a WMM-capable STA carry the user priority (Layer 2) or DSCP priority (Layer 3), and tunnel packets carry the 802.1p priority (Layer 2) or tunnel DSCP priority (Layer 3). 802.11 packets sent to the AC from an AP must be converted into tunnel packets.

You can run the priority-map tunnel-upstream trust command to configure a trusted priority type used in mapping from 802.11 packets to tunnel packets when packets are sent to the AC from an AP.

Precautions

The tunnel priority mapping is applicable to scenarios where data packets are sent in tunnel forwarding mode.

Example

# In traffic profile p1, configure the DSCP priority as the trusted priority type used in mapping from 802.11 packets to tunnel packets when packets are sent to the AC from an AP.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] traffic-profile name p1
[HUAWEI-wlan-traffic-prof-p1] priority-map tunnel-upstream trust dscp
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126116

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next