No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap led

display ap led

Function

The display ap led command displays the indicator blinking status of an AP.

Format

display ap led { ap-mac ap-mac | ap-name ap-name | ap-id ap-id }

Parameters

Parameter

Description

Value

ap-mac ap-mac

Specifies the MAC address of an AP.

The value is in H-H-H format. An H is a hexadecimal number of 4 digits.

ap-name ap-name

Specifies the AP name.

The AP name must exist.

ap-id ap-id

Specifies the AP ID.

The AP ID must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view the indicator blinking status of an AP.

Example

# Display the indicator blinking status of the AP with the MAC of 0025-9e07-8260.

<HUAWEI> display ap led ap-mac 0025-9e07-8260
---------------------------------------------------------------------------------------------------------
Led status          : blink
Blink left time(s)  : 100
--------------------------------------------------------------------------------------------------------
Table 11-17  Description of the display ap led command output

Item

Description

Led status

Blinking status of the indicator.
  • off: The indicator is off.
  • blink: The indicator is blinking.

    To configure the parameter, run the led blink-time command.

  • normal: The indicator is running properly. The running status of the AP is displayed according to the indicator description.

Blink left time(s)

Remaining time of the indicator blinking status.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 123275

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next