No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
vlan tagged (WDS profile view)

vlan tagged (WDS profile view)


The vlan tagged command adds one or a group of VLANs to a WDS profile in tagged mode.

The undo vlan tagged command deletes VLANs from a WDS profile.

By default, no VLAN is configured in a WDS profile.

Currently, VLANs can only be added to a WDS profile in tagged mode.


vlan tagged { vlan-id1 [ to vlan-id2 ] } &<1-10>

undo vlan tagged { { vlan-id1 [ to vlan-id2 ] } &<1-10> | all }





vlan-id1 [ to vlan-id2 ]

Specifies the tagged VLAN ID.
  • vlan-id1 specifies the first VLAN ID.
  • to vlan-id2 specifies the last VLAN ID. The value of vlan-id2 must be equal to or greater than the value of vlan-id1. The vlan-id1 and vlan-id2 parameters determine a VLAN range.

If to vlan-id2 is not specified, only the VLAN specified by vlan-id1 is added to the WDS profile in tagged mode.

You can specify a maximum of 10 VLAN ranges at a time. The entered VLAN ranges cannot overlap.

  • The value of vlan-id1 is an integer that ranges from 1 to 4094.
  • The value of vlan-id2 is an integer that ranges from 1 to 4094.


Deletes all tagged VLANs from a WDS profile.



WDS profile view

Default Level

2: Configuration level

Usage Guidelines

Adding VLANs to a WDS profile is equivalent to adding hybrid interfaces to a VLAN. After one or a group of VLANs is added to a WDS profile, the WDS link forwards only the packets with these VLAN IDs from STAs and peer APs.


A maximum of 256 VLANs can be added to a WDS profile.


# Create the WDS profile test and add VLANs 3, 4, 5, 6, 10, and 12 to the WDS profile in tagged mode.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] wds-profile name test 
[HUAWEI-wlan-wds-prof-test] vlan tagged 3 to 6 10 12
Related Topics
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124738

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next